Jeep Grand Cherokee valve block OEM

The valve unit is an original replacement part for the pneumatic air suspension system. The valve unit is a new Continental part.  

Models:

Jeep Grand Cherokee WK2 (2011-2018)

The valve unit controls the air supply and exhaust from the left front and rear, right front and rear of your vehicle.

Original type number:

68087233AA

Advantages:

The part is of very high quality;

The solenoid valve is original and is therefore plug & play;

- N.B.:

The suspension of this vehicle is based on a combination of electronically controlled level control and a nitrogen and air-filled system. The pressure in the system MUST be 17 bar as output pressure after replacing the following parts such as compressor, air spring, valve block and / or shock absorbers. A new Continental compressor can only partially compensate for the pressure difference. In short, proper manufacturer installation specifications MUST be followed. Failure to follow these installation specifications will result in your system continuing to malfunction. If the part is damaged for this reason, it is not covered by any warranty. The complete emptying of the system is the general specification of the car manufacturer. After replacing the corresponding spare part, the system MUST be charged with CO2 or nitrogen in accordance with the vehicle manufacturer's specifications. This can only be done with the right software and the right tools. Only then is it possible to further calibrate the level control and operate it correctly.