Porsche Panamera 971 valve block | valve unit 971616056

The valve block is a replacement part for the Porsche pneumatic air suspension system.

Models:

Porsche Panamera 971 (2016 - present)

Original type numbers:

971616056C; 971616056; 971616013C; 971616013A; 971616013B; 971616056A; 971616056B

Cross references: RAPA-LF44

The valve unit controls the air supply and exhaust from the left front and rear, right front and rear of your vehicle.

Scope of delivery:

Porsche Panamera 971 valve block | valve unit

-

N.B.: The suspension of this vehicle is based on a combination of electronically controlled level control and a nitrogen and air-filled system. The pressure in the system MUST be 17 bar as output pressure after replacing the following parts such as compressor, air spring, valve block and / or shock absorbers. A new Continental compressor can only partially compensate for the pressure difference. In short, proper manufacturer installation specifications MUST be followed. If you do not follow these installation specifications, your system will continue to malfunction. If the part is damaged for this reason, it is not covered by any warranty. The complete emptying of the system is the general specification of the car manufacturer. After replacing the corresponding spare part, the system MUST be charged with CO2 or nitrogen in accordance with the vehicle manufacturer's specifications. This can only be done with the right software and the right tools. Only then is it possible to further calibrate the level control and operate it correctly.